MULTIPURPOSE OILS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| ULTRA MF | 10 / 22 / 32 / 46 / 68 / 100 / 150 / 220 | Oils for the lubrication of bearings, hydraulics, slideways and gears. Classification: ISO-L-HM. Meet the requirements of the standards: DIN 51524-Part 2 HLP / DIN 51517-Part 3 CLP. |
| ULTRA ATOX | 32 / 46 / 68 / 100 / 150 / 220 / 320 / 460 | White oils with additives for the lubrication of bearings, hydraulics, slideways, gears, circulation systems and compressors. Meet the requirements of the standards: ISO 6743/4-HM. DIN 51524-Part 2 HLP. DIN 51517-Part 3 CLP. DIN 51506-VD-L. Certified by NSF as H1 – suitable for accidental food contact. |
| ULTRASYNT ATOX | 32 / 46 / 68 / 100 / 150 / 220 / 320 / 460 / 680 | Synthetic oils for long lasting high-performance lubrication for bearings, hydraulic systems, pumps, chains, gears and compressors. These oils exceed the requirements of standards ISO 6743/4 – HM. DIN 51524 – Part 2 HLP – DIN 51517 – Part 3 CLP – DIN 51506 -VD-L. Certified by NSF as H1 – suitable for accidental food contact. |
| ULTRA VBA | 46 / 68 | Multifunctional lubricants with Vegetable-based bases, suitable for incidental food contact (NSF H1), totally free of hydrocarbons and biodegradable. Specials as hydraulics for vegetable oil mills. Quality level DIN 51524 Part 2 HLP / DIN 51517 Part 3 CLP. |
| ULTRATEF H1 | 100 | Multifunctional oil with PTFE for lubrication of open mechanisms in the food industry. NSF approved as H1 for accidental food contact. |
| ULTRA BIO | 100 | Recommended for the lubrication of industrial gears, bearings, guides, chains, hydraulic circuits, pumps and circulation lubrication, in case of possible discharge of the lubricant into the environment. |
GENERAL LUBRICANTS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| ENGINE OIL 7 | 100 | General lubricant for machinery and mechanisms bearing moderate loads at moderate speeds. Have high oiliness and thermal stability. |
| ENGINE OIL 12 | 150 | General lubricant for machinery and mechanisms bearing moderate loads at moderate speeds. Have high oiliness and thermal stability. |
SPECIAL LUBRICANTS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| ULTRA SP 2 | 2 | Lubrication of high-speed spindles operating at extremely close tolerances (“zero clearance”). |
| ULTRA CS 200 H1 | 200 | Specially formulated for the lubrication of high-speed canning machine mechanisms. Ensures correct lubrication under the most demanding operating conditions and is applicable in machinery that presents a risk of contamination of the product with the lubricant. |
| STANDARD SLIP | 68 / 100 / 150 / 220 / 320 / 1000 | Special oils for the lubrication of horizontal and vertical slideways and drip-free general lubrication. These oils contain unctuosity, adherence, and extreme pressure (E.P.) additives. Quality level ISO 6743/4-L-HG / DIN 51524 – Part 2 – HLP / DIN 51517 – Part 3 – CLP. |
GEARS OILS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| STANDARD VAREN EP | 100 / 150 / 220 / 320 / 460 / 680 / 1000 | Lubrication of industrial gearboxes. Meets the requirements of the standards: DIN 51517 Part 3-CLP / US STEEL 224 / AGMA 9005-D94. |
| ULTRAGEAR EP | 150 / 220 / 320 / 460 / 680 | Mineral-based oils for gears operating under heavy-duty load conditions. |
BIODEGRADABLE GEARS OILS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| ULTRA BIO 100 | 100 | Recommended for the lubrication of industrial gears, bearings, guides, chains, hydraulic circuits, pumps, and circulation lubrication, in case of possible discharge of the lubricant into the environment. |
GEAR OILS FOR THE PRINTING INDUSTRY
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| ULTRAPRESS AG 5 LA | 68 | Gear oils specially formulated to meet the requirements of printing machine manufacturers (MANROLAND, etc). |
SYNTHETIC GEAR OILS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| ULTRASYNT EP | 150 / 220 / 320 / 460 / 680 / 1000 | Polyalphaolefin-based synthetic gear oils operating under severe load and temperature conditions. Approved by Siemens MD for use in Flender gears. |
| ULTRASYNT FGT | 150 | Special synthetic oil for lubrication of bearings and gears under high loads in the food, beverage, pharmacy and cosmetic industries. NSF H1 certified for incidental food contact. |
| ULTRASYNT WG | 1000 | Suitable for long-term lubrication of worm gears. Can be used in circulation systems for plain and roller bearings at high temperatures. |
| ULTRAGEAR PG | 150 / 220 / 320 / 460 / 680 | Synthetic oil formulated with polyglycol base for gear lubrication. Exceptional thermal stability and oxidation resistance. Extends oil change intervals. |
SLIDEWAYS AND DRIP-FREE
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| STANDARD SLIP | 68 / 100 / 150 / 220 / 320 / 1000 | Special oils for the lubrication of horizontal and vertical slideways and drip-free general lubrication. These oils contain unctuosity, adherence, and extreme pressure (E.P.) additives. Quality level ISO 6743/4-L-HG / DIN 51524 – Part 2 – HLP / DIN 51517 – Part 3 – CLP. |
CHAINS OILS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| ULTRACHAIN HT | 220 / 320 | Synthetic lubricants for chains operating at temperatures up to 250ºC. High lubricating power. Residue-free. |
| ULTRACHAIN PRO | 150 / 270 / 460 | Oils with synthetic bases for chains working at temperatures of 200-220ºC. High resistance to oxidation and residue formation. |
| ULTRA CLT 320 | 320 | Synthetic lubricant for chains operating from -30 up to 120ºC. Resistant to moisture, water and steam. High adherence. Suitable for chains, cables, cams, open mechanisms. |
| STANDARD SINT 15 | 15 | Biodegradable ester-based synthetic chain oil. Operating temperature from -50 up to +180ºC. Suitable for operation in dusty conditions and where environmental contamination is possible. |
| STANDARD CLT 460 | 460 | Mineral oil for chains and slideways working up to +150ºC with high loads and moisture. Quality level ISO 6743/4 – category L-HG / DIN 51517 – CLP. |
| ULTRACHAIN CPO | 270 | Ester-based synthetic oil for chain lubrication with operating temperature up to +250ºC. Compatible with some paints used in cataphoresis. |
| ULTRACHAIN FG | 220 | Ester-based synthetic oil for chain lubrication with operating temperature up to +250ºC. Certified by NSF as H1 – suitable for incidental food contact. |
| ULTRADRY 320 | 320 | Dispersion of micronized graphite in a synthetic fluid for the lubrication of chains, bearings, sliding surfaces, support rings, etc., at temperatures up to 450ºC (600ºC with sufficient relubrication). |
| ULTRACHAIN CTP 145 | 145 | Special synthetic oil for lubricating chains in overhead and ground conveyors of cataphoretic paint lines. ULTRACHAIN CTP 145 is compatible with most water-soluble paints and prevents the formation of craters, “fish eyes,” and other surface defects. |
COMPRESSORS AND PUMPS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| STANDARD CP | 46 / 68 / 100 / 150 | Mineral oils for air compressors with specific additives. High stability to oxidation, preventing the formation of deposits. Comply with the standard DIN 51 506. Category VD-L. |
| ULTRABAR HC | 46 | Special hydrocarbon-based oils for lubricating screw and vane compressors under severe operating conditions. Quality level: ISO 6743/3 – DAH / DIN 51 506 – VD-L. |
| ULTRABAR HS | 46 / 68 / 100 / 150 | PAO synthetic base oils for long-term lubrication of screw and vane compressors under severe operating conditions. Quality level: ISO 6743/3 – DAJ / DIN 51 506 – VD-L. |
| STANDARD FRI | 68 | Mineral naphthenic oil for the lubrication of refrigerating compressors of ammonia, freons R12 and R22, and propane-butane. Complies with DIN 51503-KAA/KC/KE. |
| STICK PRESS AG 23 | 320 | Special oil for vacuum and pressure pumps in the Printing Industry. Complies with standard DIN 51 506 / VB-L / VC-L / VD-L. |
NEBULIZABLE OILS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| NEBULOIL 2 | Not specified | Contains anti-wear, anti-oxidation, and anti-corrosion additives, ensuring optimal machinery protection. Maintains consistent viscosity across a wide temperature range, enhancing efficiency. Resists thermal breakdown and minimizes foam formation, crucial for hydraulic systems and gearboxes. |
NEBULIZABLE OILS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| NEBULOIL 2 | Not specified | Contains anti-wear, anti-oxidation, and anti-corrosion additives, ensuring optimal machinery protection. Maintains consistent viscosity across a wide temperature range, enhancing efficiency. Resists thermal breakdown and minimizes foam formation, crucial for hydraulic systems and gearboxes. |
SPECIAL HYDRAULICS FOR INDUSTRY
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| PRESOL HM | 32 / 46 / 68 / 100 | Mineral-based hydraulic oils with anti-wear additives. Suitable for hydraulic systems operating under moderate conditions. Complies with DIN 51524 Part 2 HLP. |
| PRESOL HV | 32 / 46 / 68 | High viscosity index hydraulic oils with excellent thermal stability. Ideal for systems exposed to wide temperature variations. Meets DIN 51524 Part 3 HVLP. |
| PRESOL HV PLUS | 46 / 68 | Enhanced high viscosity index oils offering superior oxidation stability and wear protection. Designed for demanding hydraulic applications. |
| PRESOL TH EP | 32 / 46 / 68 | Hydraulic oils with extreme pressure (EP) additives. Suitable for systems subjected to high loads and pressures. Complies with DIN 51524 Part 2 HLP. |
| PRESOL HFC | 40 | Water-glycol based fire-resistant hydraulic fluid. Recommended for applications where fire hazards exist. Meets ISO 12922 HFC. |
| PRESOL HE FR | 46 | Fire-resistant hydraulic fluid based on synthetic esters. Biodegradable and suitable for environmentally sensitive areas. Complies with ISO 15380 HEES. |
| ULTRAPRESS SC HM | 68 / 100 / 150 / 220 | High-performance mineral hydraulic oils with anti-wear properties. Suitable for heavy-duty hydraulic systems. Meets DIN 51524 Part 2 HLP. |
| ULTRAPRESS SC HV | 46 / 68 | High viscosity index hydraulic oils ensuring consistent performance across temperature variations. Ideal for outdoor equipment. Complies with DIN 51524 Part 3 HVLP. |
| ULTRAPRESS SCD | 46 / 68 | Detergent-type hydraulic oils that keep systems clean by dispersing contaminants. Suitable for systems requiring cleanliness. Meets DIN 51524 Part 2 HLP-D. |
| ULTRAPRESS HEES | 46 | Biodegradable synthetic ester-based hydraulic fluid. Designed for applications requiring environmental compliance. Complies with ISO 15380 HEES. |
| ULTRAPRESS SC 46 SL | 46 | Specially formulated hydraulic oil with anti-stick-slip properties. Ensures smooth operation of hydraulic systems. Suitable for precision machinery. |
| ULTRAPRESS SC 46 KM | 46 | Hydraulic oil designed for systems requiring low friction and high precision. Offers excellent wear protection and thermal stability. |
| ULTRA VBA | 46 / 68 | Vegetable-based multifunctional lubricants suitable for incidental food contact (NSF H1), completely free of hydrocarbons and biodegradable. Specially designed for hydraulic systems in vegetable oil mills. Quality level: DIN 51524 Part 2 HLP / DIN 51517 Part 3 CLP. |
| ULTRAPRESS AG | 68 | High-performance hydraulic oil for agricultural machinery. Provides excellent protection against wear and corrosion. Suitable for a wide range of agricultural applications. |
TECHNICAL OIL
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| SIVANO | 10 / 22 | Technical oil used as a plasticizer and additive in chemical formulations. |
| WHITE SI | 220 | Silicone oil with high thermal stability, used to lubricate components working between -30°C and 200°C, and as an additive in the textile industry. |
MEDICINAL OILS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| FARMOL | 15 / 32 / 68 / 22 / 33 / 55 | Pharmaceutical-grade white oil used as lubricant and additive in food processing, cosmetics, and pharmaceuticals. Meets DAB 10 and FDA 178.3620 (a). NSF 3H certified for direct contact with food. |
| FARMOL NL | 22 | Medicinal white oil with high viscosity (>20.5 mm²/s), non-hazardous by inhalation. Similar use to FARMOL 22. |
| ULTRAFARM 40 | 40 | Stabilized white oil with antioxidant, used in dough divider machines in bakeries. Meets FDA 178.3620 (a), FDA 172.878. NSF 3H certified for direct food contact. |
| ULTRAFARM VDP-E | 32 | Vegetable oil with additives, for use in industrial bakery dough divider machines. High thermal and oxidation stability. NSF 3H certified. |
| WHITE OIL FILANTE | – | Pharmaceutical-grade white vaseline, suitable for cosmetics, pharmaceuticals, and as food-safe lubricant. Complies with DAB 10 and FDA 178.3620 (a). |
| ULTRASIL CUT 300 | 1 | Food-grade silicone emulsion for lubrication and cooling in light metal machining operations. |
HEAT TRANSFER FLUIDS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| ACEITE TERMICO 3 | 22 | Synthetic thermal fluid for closed circuits. For use at temperatures from -20°C to +320°C. |
| ULTRATERMIC P 6 | 32 | Heat transfer fluid of synthetic base for closed circuits where a food grade product is required. Operating temperature up to 315°C. NSF H1 certified. |
SPECIAL OILS
| Product | ISO VG Viscosity (CST at 40° C) | Description and applications |
|---|---|---|
| ULTRA PFPE | 150 / 220 / 460 | Synthetic oils with perfluoropolyether base for lubrication in extreme conditions, presence of aggressive chemical products, high temperatures and lubrication for life. |
| ULTRA SP 2 | 2 | Lubrication of high-speed spindles operating at extremely close tolerances (“zero clearance”). |
| ULTRA CS 200 H1 | 200 | Specially formulated for the lubrication of high-speed canning machine mechanisms. Due to its high stability and minimal residue formation, it ensures correct lubrication under the most demanding operating conditions. Applicable in machinery that presents a risk of contamination of the product with the lubricant. |